Equipment.com.ua
Головна / Блоки живлення та електронні навантаження / Джерела живлення постійного струму / Двонаправлені джерела постійного струму / EA Elektro-Automatik EA-PSB 10060-510 3U двоспрямований блок живлення постійного струму

EA Elektro-Automatik EA-PSB 10060-510 3U двоспрямований блок живлення постійного струму

EA Elektro-Automatik EA-PSB 10060-510 3U Bidirectional DC Power Supply

EA Elektro-Automatik · Модель: EA-PSB 10060-510 3U На замовлення
EA Elektro-Automatik EA-PSB 10060-510 3U двоспрямований блок живлення постійного струму
Запитати ціну

EA Elektro-Automatik EA-PSB 10060-510 3U bidirectional DC supply with 60V/510A output, 15kW capacity, energy recovery to grid, and advanced test functions for battery and power electronics testing.

Модель EA-PSB 10060-510 3U
Виробник EA Elektro-Automatik
Категорія Двонаправлені джерела постійного струму
Наявність На замовлення

Overview

The EA-PSB 10060-510 3U is a programmable bidirectional DC power supply from the PSB 10000 series. This two-quadrant device functions as both a power supply and electronic load, with regenerative capability that recovers energy back to the grid at over 96% efficiency. It is designed for demanding laboratory and industrial testing applications.

Key Features

  • Output: 60V, 510A, 15kW with flexible autoranging capability
  • Wide input: 208-480V ±10% three-phase AC with active power-factor correction
  • Bidirectional operation: source and sink modes with energy recovery to grid
  • Regulation modes: CV, CC, CP, CR with fast crossover
  • Color 5" TFT touch display with intuitive user interface
  • 16-bit ADCs and DACs with selectable control speeds (Normal, Fast, Slow)
  • Integrated function generator with predefined waveforms (sine, triangle, square, trapeze, ramp)
  • Automotive test procedures: LV123, LV124, LV148 compliance
  • Battery test mode, fuel cell simulation, and MPPT photovoltaic simulation (EN 50530)
  • Master-Slave and Share-Bus for parallel operation of up to 64 units
  • Communication: SCPI, ModBus, LabVIEW, IVI drivers
  • Interfaces: USB, Ethernet, Analog, CAN, CANopen, RS232, Profibus, EtherCAT, Profinet, Modbus

Applications

  • Battery testing for electric mobility (cell, module, pack, SOH assessment)
  • On-board charger (OBC) testing with dynamic load profiles
  • Battery and fuel cell simulation
  • Solar array and photovoltaic inverter testing
  • Fuel cell performance and longevity testing
  • Battery recycling and state-of-health determination
  • High-power multi-unit systems up to 1920 kW

Included Accessories

  • 1x bidirectional power supply device
  • 2x remote sensing plugs
  • 1x 1.8m USB cable
  • 1x DC terminal covers set
  • 1x sense terminal cover
  • 1x USB stick with documentation and software
  • 1x AC connector plug (clamp type)
  • 1x AC cable strain relief set
Maximum Power 15 kW
Output Voltage 60 V
Output Current 510 A
Input Voltage 208-480 VAC
Interface USB, Ethernet (100 MBit) for communication, 1 x USB Host for Data Acquisition
Display 5 TFT Color Touch
Series EA-PSB 10000 3U Series
Current Accuracy ≤0.1% FS
Current Range Selector 500-1,499
Dimensions 19 x 5.25 x 30.6"
Frequency Range 45-65 Hz
IP Rating IP20
Mounting Type Rack Mount
Number of Outputs Single Output
Operating Temperature Range 32-122°F
Power Range Selector 10,000-19,999
Relative Humidity Range ≤80%
Resistance Range 0.006-9 Ω
Safety EN 61010-1 IEC 61010-1 UL 61010-1 CSA C22.2 No 61010-1 BS EN 61010-1
Storage Temperature -4-158°F
Type Programmable Bi-Directional DC Power Supply
Voltage Accuracy ≤0.05% FS
Voltage Range Selector 50-99.9
EA Elektro-Automatik EA-PSB 10060-510 3U двоспрямований блок живлення постійного струму

Запит ціни

EA Elektro-Automatik EA-PSB 10060-510 3U двоспрямований блок живлення постійного струму

Відповідь протягом 24 годин
Без зобов'язань
Пряма комунікація

Надсилаючи форму, ви погоджуєтесь на обробку персональних даних відповідно до нашої політики конфіденційності.